Jump to content



Toggle shoutbox Shoutbox - sponsored by IRSmart's ToyBox! Open the Shoutbox in a popup

The Shoutbox is not intended for technical discussions. Please post your technical questions in the forums so that everyone can benefit.
@  Low-Speed : (19 November 2014 - 06:54 PM) the diameter on the large and small section of the strut above the perch, as well as the rod diameter
@  Dylan214 : (19 November 2014 - 06:49 PM) What u need? There stock mopar shocks and springs lol
@  Low-Speed : (19 November 2014 - 06:25 PM) I mostly need measurements
@  Dylan214 : (19 November 2014 - 06:01 PM) I put 4 new strut mounts on them. At 55k. The car got 59,619 miles on it
@  Dylan214 : (19 November 2014 - 06:00 PM) I'm still on my stock ones. Ill be changing over this winter so if u need a set.
@  Low-Speed : (19 November 2014 - 05:32 PM) Better yet, is there anyone here with a set of stock shocks out of the car?
@  Low-Speed : (19 November 2014 - 04:10 PM) Kenny - check your facebook
@  Dylan214 : (19 November 2014 - 12:32 PM) no miles on them.
@  Dylan214 : (19 November 2014 - 12:31 PM) I also own a set of Eibach Pro-Kit lowering springs
@  KennyL : (19 November 2014 - 08:58 AM) Sending a PM Mr. William, I have an idea.
@  KennyL : (19 November 2014 - 08:14 AM) Run the NEX if you're got them, they are much better quality than a slip-on coil-over. You can indipendantly adjust the ride height and the spring pre-load, is the main difference.
@  Dylan214 : (19 November 2014 - 08:05 AM) Being they fell in my lap I own a set of Koni adjustable/coil-over and NEX(Ebay 300$) I am still deciding what ones do I run
@  Low-Speed : (19 November 2014 - 06:56 AM) I just want a set of Maxspeed/DropZone style for now
@  KennyL : (19 November 2014 - 06:19 AM) I didn't think anyone still carried the NEX for this platform, that's good to know. The AMR is far exceptional in quality and custom made for your application. All dependent on budget, and I know yours is slim. The NEX set at that price is cheaper than they were new during the group buy. Probably the best deal in coil-overs to be found.
@  Low-Speed : (19 November 2014 - 05:09 AM) http://www.cooperrac...COILOVER/Detail
@  KennyL : (19 November 2014 - 04:01 AM) Sorry, William, can't let go of mine just yet. I did finally get an email back from AMR engineering, though. He said making a set of high quality coil-overs for the Stratus platform would be "a piece of cake, just another day at the office". $1600 to $1795 shipped. Check out the Neon AMRs, they're top quality. If I could afford a set right now, you'd be getting my Koni adjustable/coil-over setup on the cheap. Heh.
@  borgwarrior : (19 November 2014 - 02:44 AM) Sgtmyers, what do you mean by erratic? The misfires? Those i dont have. I'd try a higher octane fuel first though. I'll ask the club, maybe they have a solution.
@  Low-Speed : (18 November 2014 - 07:16 PM) Anyone have a set of eBay coil sleeves they want to let go cheap?
@  sgtmyers88 : (18 November 2014 - 07:13 PM) Borgwarrior How did you fix your erratic engine problem?
@  Low-Speed : (18 November 2014 - 05:23 PM) I am going to have to rename it Plan C at this point

Photo
- - - - -

FS: 1976 Superior Dodge motor home


  • Please log in to reply
2 replies to this topic

#1 KennyL

KennyL

    What am I? One of a kind.

  • Active Members
  • PipPipPipPipPip
  • 740 posts
Garage View Garage

Posted 25 March 2008 - 12:31 PM

I don't know if anyone on here is looking for a motor home(or a unique project vehicle~ xD tune the 440) but we are selling our RV. It's hardly been used and has been well taken care of by us. For more info/photos go to my Ebay listing. It's a BIN or best offer. 4 large is what my dad want's BIN, but we will accept offers to see interest and may take less. I have it set to auto-decline less than 3000, as that's what dad told me...we have put a lot into it and just don't use it anymore, hence the sale.

By the way, that 440 is a brute and very tight. We haven't done a compresion check, but it's definatly healthy and can move this RV easily. Even with it being ALL METAL BODIED. That's right, most RVs are 'glassed or something, this is solid metal and HEAVY.

#2 irishfire86118

irishfire86118

    We're an underground revolution working overtime...

  • Active Members
  • PipPipPipPip
  • 486 posts

Posted 25 March 2008 - 02:47 PM

Where's Lexington IN?

#3 KennyL

KennyL

    What am I? One of a kind.

  • Active Members
  • PipPipPipPipPip
  • 740 posts
Garage View Garage

Posted 25 March 2008 - 03:16 PM

Where's Lexington IN?



A small town in southern Indiana, east of Interstate 65. If you're asking because of wanting to look at it, scedule through Ebay "ask seller a question" if you have an account there. Those on this forum could PM me as well I guess, but it's local pick up only(and when you drive it home keep in mind it gets 8 MPG, though it does have a large gas tank...so it'd be best if you were close or if money is no object :lol: ).